Old sprinkler system

Observed: colors at controller aren't identical to colors at values in every case. I remember that the installers shorted us cable and I had to augment with a new length whose colors were different. Aberrant in particular: red, green and grey. Therefore, somewhere these connect and some mappings are done, but it's no longer possible to discern.

Original Orbit controller wiriing

The Orbit controller offered 12 zones.

Zone Wire color Description
0 white Common wire—goes to every valve
 
1 red Front parkway and central lawn sprinklers
2 purple South (garage) and front parkway (mailbox)
3 green North: back lawn, side and front lawn (north of steps)
4 black Lawn under deck
 
5 grey Back bottom
6 blue Big front plantings microsprays
7 yellow South microsprays
8 orange Back planter, back hedge and back down-hill microsprays
 
9 brown Back yard bottom (unirrigated)

Valves...

...by box and color (and original zone assignments at controller)

Zone Controller Valve Description
color color
0 white white Common wire—goes to every valve
 
Front box:
1 red red Front parkway and central lawn sprinklers
3 green green Back north-side lawn, side and front lawn sprinklers
6 blue blue Front north and central plantings microsprays
 
South box:
7 yellow yellow South microsprays
2 purple red South lawn and mailbox parkway sprinklers X
 
Back box:
8 orange orange Back planter, back hedge and back down-hill microsprays
4 black green Back lawn under deck sprinklers
5 brown blue Back yard bottom (unirrigated)
 
Back (little round) box—wired through from back box:
9 brown brown Back south (from opposite back door to south fence) microsprays